Internal processing of audio signals can be fully programmed to suit the client’s application.
Installers can select the audio processing feature(s) which they wish to apply to the various inputs and outputs from a library on their PC, using software provided with the UAP. Once the configuration process is complete, it can be loaded into the UAP. All configurations can be backed-up onto PC and loaded into the UAP as and when required.

 

* Old Software (I.c Firmware) is for UAP standard version (Without analogue control inputs) 

  

	Data Sheet	User Manual	Software UAP88 Advanced v1.9.19	Software UAP88 Standard v1.9.1
UAP88

 

 

 

 

The user interface comprises 8 dials on the front and 6 (0 to 5 VDC) analogue control inputs. Each control can be associated to any of the variable audio processing functions of the UAP (input level, output level, source selection, routing, perset change...). The RAC5 and RAC8 ATEÏS DC remote controllers are ideally suited to be connected to the analogue control inputs for Level and Source Selection controls.
The UAP can also be controlled via an external system such as Crestron, AMX, or via a PC using an operating program provided with the UAP. This program makes it possible, for example, to load a map or picture of the site and to only integrate the settings which we wish to make available to the final user.
The UAP processor has 8 universal balanced audio inputs and 8 balanced audio outputs. It is also fitted with 8 inputs (TTL) and 8 logic outputs (TTL). Each of those hardware input/output can be associated to virtually any software button the system designer requires. The logic inputs can be use to load a preset, mute or activate an audio signal, while the logic outputs enable the UAP to control external equipment. The UAP processor presents the end user with state-of-the-art technology, while remaining extremely user-friendly thanks to its user interface.

MAIN PROPERTIES

• 8 balanced audio inputs (-55 dB to 0 dB switchable)
• balanced audio outputs (0 dB).
• Switchable Phantom Power supply.
• 8 logic inputs and 8 logic outpusn (TTL).
• 6 analogue control inputs (0 to 5 VDC).
• 1 RS232 connection for configuration and remote control.